For Vigorpro 5500Gi - Draytek VigorPro 5500 Series User Manual

1 . 2 . 4 F o r V i g
1 . 2 . 4 F o r V i g
LED
ACT (Activity)
Virus
IDP (Intrusion Detection and
Prevention)
DMZ
Monitor
VPN
QoS
WLAN
ISDN
LED on Connector
WAN
LAN/Monitor
LAN
VigorPro5500 Series User's Guide
o r P r o 5 5 0 0 G i
o r P r o 5 5 0 0 G i
10
(left LED)
100
(right LED)
100
(left LED)
1000
(right LED)
Status Explanation
Blinking The router is powered on and running normally.
Off The router is powered off.
On (Yellow)
The anti-virus function is enabled.
On The anti-intrusion function is enabled.
(Yellow)
On DMZ Host is specified in certain site.
On LAN traffic monitor is active.
On The VPN tunnel is launched.
Off The VPN tunnel is closed.
On The QoS function is active.
On Wireless access point is ready.
Blinking Ethernet packets are transmitting over wireless LAN.
Off The WLAN function is inactive.
On The ISDN service function is active.
Blinking A successful connection on the ISDN BRI
B1/B2 channel.
On The port is connected with 10Mbps.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 100Mbps.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 100Mbps.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is disconnected.
Blinking The data is transmitting.
5