Honeywell VISTA 15P - Ademco 6 Zone Control Panel User Manual page 47

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
Manually
1. Should you become aware of a fire emergency before your smoke or
heat detectors sense the problem, go to your nearest keypad and
Initiating
manually initiate an alarm by pressing the panic key assigned for
a Fire Alarm
FIRE emergency for 2 seconds (see below). If a key pair has been
assigned for fire, press both keys at the same time. See the Using
the Panic Keys section below for further details.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
your local Fire Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the
alarm. The zone number(s) of the zone(s) in an alarm condition will
be displayed at the keypad.
Using the
A key or key pair may have been assigned for manually initiating a
Panic Key(s) FIRE alarm. See the Panic Keys section for key assignments.
Assigned for For convenience, indicate the key or key pair assigned for fire below.
FIRE
In divi dua l Key s
Emergency
A
O R
Key Pai r s
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
ALPHA DISPLAY KEYPAD
National Security Systems Inc (800) 457-1999
Fire Alarm System
B C
Press the individual key assigned for fire for 2 seconds.
∗
1
and
OFF READY
∗
#
and
READY
3 #
and
(zone 96)
STAY
F I R E 9 5
(zone 95)
Press both keys of the
key pair assigned for
(zone 99)
fire at the same time.
95 95 95 95
ALARM
FIRE
FIXED-WORD KEYPAD
(cont'd)
AC
– 47 –