GE HOME GENERATOR SYSTEM 11000 WATT Operator's Manual page 14

To remove exhaust panel:
1. Remove roof and divider.
2. Remove side panels.
WARNING Contact with muffler area could cause burns
resulting in serious injury.
• DO NOT touch hot parts and AVOID hot exhaust gases.
• Allow equipment to cool before touching.
3. Remove 6 screws
A
A
A
4. Pull exhaust panel up and out of base.
5. Remove two screws
B
6. Replace muffler cover and exhaust panel in reverse
order.
14
A
from exhaust panel.
B
and pull muffler cover off.
To install side panels:
1. Place panel in grooves and slide down in place.
A
2. Push latches
into place.
A
A
3. Replace divider and rotate knobs 1/4 turn to
lock in place.
B
4. Replace roof.
C
down on both sides of panel to lock
C