GE JGB820SEPSS - 30-in Gas Range Dimensions And Installation Information

JGB820SEP
GE 30" Free-Standing Self-Clean Free-Standing Gas Range
®
Dimensions and Installation Information (in inches)
Optional Gas Range Accessory Drip Pans for Sealed
and Standard Burner Models
(Available at additional cost)
To order these accessory drip pans, call toll-free
800-626-2002.
Gas Self-Clean Range Anti-Tip Bracket
(Part No. 205C1714P001)
Electrical Rating: 120V, 60Hz, 9A
Installation Information: Before installing, consult
installation instructions packed with product
for current dimensional data.
30-7/8"
All 30" GE gas and electric range backguards
are 30-7/8" wide.*
Note: 30" ranges conform to U.L. requirements
for 0" spacing from adjacent walls below
countertops. To reduce possible scorching of
walls, engineering recommends a minimum of
1-1/2" spacing to allow for possible extended,
high heat, no-load heating element operation.
* Except these models: JGBS07, JGBS04, all GE
Profile free-standing electric and gas ranges
Fits most countertop backsplash applications.
Consult Use & Care Manual for detailed
installation instructions.
For answers to your Monogram,
®
GE appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
service, 800.626.2000.
GE Profile or
™
®
All GE ranges are equipped
with an Anti-Tip device. The
installation of this device is
an important, required step in
the installation of the range.
Specification Revised 1/11
CERTIFIED
330437