Verifying System Settings - Cisco IP CONFERENCE STATION 7936 Administration Manual

Chapter 3 Configuring the Cisco IP Conference Station 7936
LCD Menu Item
Ethernet Port Configuration—Access the Ethernet
Port Configuration menu by following the
procedure above and selecting Ethernet Port
Config.
Restore Defaults—Access the Restore Defaults
menu by following the procedure above and
selecting Restore Defaults. Alternatively, you can
restore the default configuration by pressing **1
from the phone's resting display menu.
Change Passcode—Access the Change Passcode
menu by following the procedure above and
selecting Change Passcode.
HTTP Port Change—Access the HTTP Port
Change menu by following the procedure above
and selecting HTTP Port Change.
System Info—Access the System Information
menu by following the procedure above and
selecting System Information.

Verifying System Settings

OL-4746-01
The IP Conference Station contains detailed information about its current system
settings. This information is useful when troubleshooting or when making
changes to any system settings.
Description
The Ethernet Port Configuration menu allows you
to change the configuration of the Ethernet port.
See the "Changing the Ethernet Port
Configuration" section on page 3-22
additional information.
The Restore Defaults menu allows you to restore
the configuration of the IP Conference Station to
the original factory settings.
See the "Default Settings" section on page 3-17
for additional information.
The Change Passcode menu allows you to change
the administrator password used on the phone.
See the "Changing the Administrator Password"
section on page 3-23
The HTTP Port Change menu allows you to
change the HTTP port. The default HTTP port is
80.
See the "Configuring the HTTP Port" section on
page 3-14 for additional information.
The System Information menu allows you to view
configuration information. See the
System Settings" section on page 3-3
additional information.
Cisco IP Conference Station 7936 Administration Guide

Verifying System Settings

for
for additional information.
"Verifying
for
3-3