Install The Hardware - D-Link VTA-VR User Manual

Chapter  - nstallation
1
Connect the blue Ethernet cable into
the blue port labeled Internet on
the back of the telephone adapter.
Connect the other end to one of your
router's Ethernet ports.
3
Verify the status lights on the unit.
The Power, Phone 1, and Internet
status lights should be solid green.
The Phone 2 light will be a solid
green if you have a second Vonage
line. (The Internet light will blink
whenever there is data activity.)
D-Link VTA User Manual

Install the Hardware

2
Connect the included power supply
to the Power port of the Telephone
Adapter. The Power LED will go through
a blink sequence before turning solid
green.
Warning: Using a power supply with a
different voltage will cause damage to
the device and will void the warranty.