Page 2
ID is a combination of twelve letters and numbers. Be sure to enter all of the characters. After you have chosen a plan and activated, please follow the step-by-step installation guide to set up your equipment. D-Link VTA User Manual...
A valid Vonage account* * If you purchased your Vonage Telephone Adapter from a retail location, you must first activate your Vonage phone service by visiting www.vonage. com/activate. After activation, wait 30 minutes before checking for a dial tone. D-Link VTA User Manual...
10 seconds supplied power signed up for a second Ethernet cable. to reset the VTA back to adapter. Vonage phone line, an the default settings. optional phone or FAX machine into phone port #2. D-Link VTA User Manual...
The Power, Phone 1, and Internet status lights should be solid green. The Phone 2 light will be a solid green if you have a second Vonage line. (The Internet light will blink whenever there is data activity.) D-Link VTA User Manual...
Page 10
Vonage phone service right NOW. Bon Vonage! 911 Service: Vonage’s 911 offering is different from that offered by traditional telephone companies; please visit www.vonage.com/911 to learn more about it. D-Link VTA User Manual...
Vonage VTA’s MAC address in the table and the IP address will be listed next to it. The MAC address is on the bottom of the Vonage VTA device. Note: The terms MAC Address and MAC ID are used interchangeably. D-Link VTA User Manual...
192.168.0.100) of the Vonage VTA adapter. Enter user for the username and your password (default password is user) and then click the Login button. It is recommended to change your password for security reasons. Please refer to page 13. D-Link VTA User Manual...
If you want to statically assign an IP address, click Static IP Address. Enter the IP address, subnet mask, and default gateway address you would like to assign to the Vonage VTA. The default gateway address must be the IP address of your router or gateway. D-Link VTA User Manual...
Chapter - Configuration Password You may change the User password on this page. Enter a new password and click Apply to save. D-Link VTA User Manual...
Chapter - Configuration Product Info The Product Info page will display product information of the Vonage VTA device such as the firmware version, software version, and MAC address. D-Link VTA User Manual...
Chapter - Configuration Save&Reboot Click Reboot to restart the Vonage VTA device. Logout Click Logout to exit the configuration utility. Click OK to verify. D-Link VTA User Manual...
Appendix A - Troubleshooting Appendix A - Troubleshooting Troubleshooting D-Link VTA User Manual...
Page 21
Vonage phone. Note: You will receive email notification from Vonage when the phone number transfer has completed. The temporary number will then be terminated. D-Link VTA User Manual...
Page 22
3 blinks (3 blinks, pause, repeat) VTA is obtaining configuration from Vonage 4 blinks (4 blinks, pause, repeat) VTA is registering with Vonage Rapid Blinking Downloading/upgrading firmware (do not power down) Solid Startup process is complete D-Link VTA User Manual...
Vonage service. If you are plugged into Port 2, try moving to Port 1. In addition, you can check the status of your Vonage service by logging into your web account. For more troubleshooting tips, visit www.vonage.com/help. D-Link VTA User Manual...