Download Print this page
D-Link DE-220PCT User Manual
Hide thumbs Also See for DE-220PCT:

Advertisement

Introduction
The D-Link DE-220P Series is a new line of Plug and
Play Ethernet adapters based on the technology of D-
Link's best-selling DE-220 Ethernet adapters. Plug
and
Play(PnP) technology provides automatic con-
figuration of newly installed devices without user
intervention, eliminating much guess-work
from in-
stallation of PC upgrades.
Ease of use is the hallmark of the DE-220P Series.
After installing a DE-220P Series card, configuration
is exceedingly simple for both traditional (non-PnP)
systems and the newer PnP-compliant systems.
For PnP systems, simply install the DE-220P Series
card into an expansion slot. Configuration by the sys-
tem software then proceeds automatically. If multiple
network interface cards are installed, the PnP system
guarantees that there are no conflicts among them.
For non-PnP systems, just install the DE-220P Series
adapter into an available expansion slot, then run the
supplied setup program, setup.exe. Online help an-
swers your questions , and an advanced diagnostic

Advertisement

loading

Summary of Contents for D-Link DE-220PCT

  • Page 1 Introduction The D-Link DE-220P Series is a new line of Plug and Play Ethernet adapters based on the technology of D- Link’s best-selling DE-220 Ethernet adapters. Plug Play(PnP) technology provides automatic con- figuration of newly installed devices without user intervention, eliminating much guess-work from in- stallation of PC upgrades.
  • Page 2 Features DE-220P Series Ethernet adapters comply with IEEE 802.3 Ethernet standards, and use VLSI components for enhanced reliability. The following features dis- tinguish D-Link DE-220P Series Ethernet adapters: Easy Installation DE-220P Series physical jumpers or DIP switches.
  • Page 3 DE-220P Series Ethernet Adapter / User’s Guide DE-2000 Drivers DE-220P Series Ethernet adapters are fully compatible with network drivers for Novell NE- 2000 adapters. Diagnostic Program A supplied diagnostic program tests all functions of the DE-220P Series adapter and verifies its communication with another computer on your network.
  • Page 4 Runs a wide variety of networking software DE-220P Series Ethernet adapters can be used with these networking systems: D-Link LANsmart NDIS driver MS LAN Manager 2 See Footnote 5, Page 2-12. D-Link TCP/IP for DOS Novell NetWare 3.x and 4.x ODI driver Windows for Workgroups Introduction...
  • Page 5 DE-220P Series Ethernet Adapter / User’s Guide Windows 95 SUN PC-NFS Banyan VINES Packet Driver FTP PC/TCP SCO UNIX UNIXware Overview of PnP Plug and Play technology (PnP) is defined by Plug and Play ISA Specification v.1.0a. system includes PnP system BIOS, and PnP-compliant interface cards. Windows 95 is the first popular PnP-compliant operat- ing system.
  • Page 6 DE-220P Series Ethernet Adapter / User’s Guide an expansion slot of a PnP-compliant mainboard, the user can run the ISA Configuration Utility (ICU) to configure the adapter. Introduction...
  • Page 7: Installation

    DE-220P Series Ethernet Adapter / User’s Guide CAUTION : Under ordinary circumstances, a DE-220P Series card will not be affected by static charge as may be received through your body during handling of the unit. In special circumstances where you may carry an extraordinarily high static charge, it is good practice to reduce the charge by touching a ground before handling the adapter.
  • Page 8 DE-220P Series Ethernet Adapter / User’s Guide Single-Adapter installation Shut down the computer, unplug its power cord, and remove the chassis cover. Insert the DE-220P Series card into the connector of any open ISA expansion slot. the card is fully seated in the expansion connector.
  • Page 9: Multiple-Adapter Installation

    DE-220P Series Ethernet Adapter / User’s Guide Multiple-Adapter Installation Multiple DE-220P Series cards may be installed in a computer to provide for multiple addresses, or in the case of a server, to provide for network seg- mentation. Multiple Cards in a PnP System special multiple DE-220P Series cards in a PnP-compliant system (so long as Plug and Play is enabled...
  • Page 10 DE-220P Series Ethernet Adapter / User’s Guide Multiple Cards in a Non-PnP System In non-PnP systems, the procedure for configuring multiple DE-220P Series cards is basically a se- quence make a preliminary installation of each card alone in turn, make a setup.exe run to configure that card, then remove that card and go on to the next.
  • Page 11: Network Cable Connections

    4 Models DE-220PCT cable connectors for convenience during network cable upgrades, and for versatility when your equipment is moved between areas with different types of network media. may be connected to any adapter in any given installation.
  • Page 12 Model Network Cable Types DE-220PT Twisted-Pair DE-220PCT Thin Coaxial DE-220PCAT Thick Coaxial 5 Twisted-pair (TP) cable features RJ-45 connectors, and is available with or without EM shield. known as 10BaseT cable or UTP (Unshielded Twisted-Pair) cable.
  • Page 13 DE-220P Series Ethernet Adapter / User’s Guide The Network Medium is Twisted- Pair Cable Ascertain that you have a straight pair cable not more than 100 meters (328 feet) in length for the network connection. 8 Pins 1 and 2 must be a pair (the connected wires must be a twisted pair in the cable makeup) and pins 3 and 6 must be a pair.
  • Page 14 DE-220P Series Ethernet Adapter / User’s Guide 2. The cable will have an RJ-45 plug on each end. DE-220P other end into an available port of a 10Base-T hub. Push each RJ-45 plug into its receptacle until its retainer snaps into place. The Network Medium is Thin Coaxial Cable Connect a BNC T-connector onto the BNC recep-...
  • Page 15 DE-220P Series Ethernet Adapter / User’s Guide The Network Medium is Thick Coaxial Cable If there is no Ethernet transceiver (tap) in place for your computer’s station on the net- work cable, supplied). Connect one end of an AUI cable to the Ether- net transceiver.
  • Page 16: Specifications

    DE-220P Series Ethernet Adapter / User’s Guide Model: AUI connector for thick coaxial BNC connector for thin coaxial RJ-45 connector for twisted-pair CE / FCC Class B Maximum power consumption Size (cm) IRQ options I/O Base Address options Boot ROM Size Boot Base Address options LED Indicators...
  • Page 17 DE-220P Series Ethernet Adapter / User’s Guide Specifications...
  • Page 18 DE-220P Series Ethernet Adapter / User’s Guide Specifications...

This manual is also suitable for:

De-220ptDe-220pcat de-220pt