Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 91

Chapter 3 Installing the IPS 4260
Squeeze the tabs to remove the filler plate.
Step 5
Step 6 Install the power supply.
To remove the power supply, push down the green tab and pull out the power supply.
Step 7
After installing or removing the power supply, replace the power cord and other cables.
Step 8
Power on the IPS 4260.
Step 9
OL-18504-01
!
!
!
!
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
Installing and Removing the Power Supply
!
3-23