Cisco IPS-4255-K9 - Intrusion Protection Sys 4255 Installation Manual page 76

Front and Back Panel Features
Figure 3-6
Figure 3-6
SPD indicator
"SPD"
Table 3-2
Table 3-2
Indicator
Left side
Right side
Table 3-3
Table 3-3
Color
Off
Green solid
Green blinking
Amber
Amber blinking
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
3-8
shows the two built-in Ethernet ports, which have two indicators per port.
Ethernet Port Indicators
6
5
4
SPD LNK SPD LNK
CONSOLE GE 0/1 MGMT
Link/ACT indicator
"LINK"
lists the back panel indicators.
Back Panel Indicators
Color
Green solid
Green blinking
Not lit
Green
Amber
lists the power supply indicator.
Power Supply Indicators
Description
No AC power to all power supplies.
Output on and ok.
AC present, only 5Vsb on (power supply off).
No AC power to this power supply (for 1+1 configuration)
or
power supply critical event causing a shutdown: failure, fuse blown (1+1
only), OCP 12 V, OVP 12 V, or fan failed.
Power supply warning events where the power supply continues to operate:
high temperature, high power/high current, or slow fan.
SPD indicator
Diagnostic System ID
indicators indicator
(for TAC use)
Description
Physical link
Network activity
10 Mbps
100 Mbps
1000 Mbps
Chapter 3 Installing the IPS 4260
Link/ACT indicator
Status
indicator
OL-18504-01