Using The Startup Wizard - Cisco AIR-WLC2106-K9 - Wireless LAN Controller 2106 Quick Start Manual

Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: ok
If the controller passes the POST, the bootup script runs the Startup Wizard, which prompts
Step 6
you for basic configuration information.
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
System Name [Cisco_bc:d0:40]:
The startup wizard runs the first time that you power up the controller. The second
Note
time you power it up, the controller prompts you for a login ID and password.

Using the Startup Wizard

Before you can use the startup wizard, you must obtain the information discussed in the "Required
Tools and Information" section on page 7. Table 1 contains startup wizard information you can use
to configure your controller for basic operation.
The available options appear in brackets after each configuration parameter. The default value
Note
appears in all uppercase letters.
If you enter an incorrect response, the controller provides you with an appropriate error
Note
message such as invalid response, and returns to the wizard prompt.
13