Installing The Prosafe Plus Switch Utility - NETGEAR GS105E-100NAS - Prosafe Plus 5PORT User Manual

Installing the ProSafe Plus Switch Utility

To take advantage of the enhanced features on ProSafe® Plus switches you can install and
use the ProSafe® Plus Switch Utility. The utility is on the Resource CD shipped with
ProSafe® Plus switches.
Note: The utility is only supported on MS Windows and can be installed on
any Windows PC(s) on the network containing the switches to be
managed.
If an earlier version of the utility is already present on the PC, it will be replaced by the newer
version. Newer versions of the utility are backwards-compatible and support all previously
released ProSafe® Plus switches. If the version of the utility you are trying to install is older
than the one already installed on the PC, the installation will not be performed.
To install the utility:
1. Insert the Resource CD that came with your switch into the PC that you want to use to
manage your switches. The Resource CD home page displays.
Resource CD pages, and the installation guide for the switch can be displayed in several
languages. Use the pull-down menu in the upper right corner of the Resource CD home
screen to select the desired language.
4 | Chapter 1: Getting Started
ProSafe Unmanaged Plus Switch Configuration Utility User Guide
Language
pull-down
menu