NETGEAR DGND3700v1 User Manual page 104

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
See
Note: Use Auto Policy to Configure VPN Tunnels
information about how to enable the IKE keep-alive capability on an
existing VPN tunnel.
Repeat these steps for the gateway on LAN B, and pay special attention to the following
6.
network settings:
WAN IP of the remote VPN gateway (for example, 14.15.16.17)
•
LAN IP settings of the remote VPN gateway:
•
IP address (for example, 192.168.0.1)
-
Subnet mask (for example, 255.255.255.0)
-
Pre-shared key (for example, 12345678)
-
Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
7.
The VPN Status screen is only one of three ways to active a VPN
Note:
tunnel. See
about the other ways.
a. On the wireless modem router menu, select VPN Status. The VPN Status/Log screen
displays:
Activate a VPN Tunnel
Virtual Private Networking
104
on page 112 for
on page 105 for information