Table of Contents
Advertisement
Configuring and Enabling RADIUS
Command
Step 3
aaa authentication login {default |
list-name} method1 [method2...]
Step 4
line [console | tty | vty] line-number
[ending-line-number]
Step 5
login authentication {default |
list-name}
Step 6
radius-server attribute 32
include-in-access-req format %h
Step 7
end
Step 8
show running-config
Step 9
copy running-config startup-config
To disable AAA, use the no aaa new-model global configuration command. To disable AAA
authentication, use the no aaa authentication login {default | list-name} method1 [method2...] global
configuration command. To either disable RADIUS authentication for logins or to return to the default
value, use the no login authentication {default | list-name} line configuration command.
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
11-8
Purpose
Create a login authentication method list.
•
To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all interfaces. For more
information on list names, click this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/1
22cgcr/fsecur_c/fsaaa/scfathen.htm#xtocid2
•
For method1..., specify the actual method the authentication
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
line—Use the line password for authentication. You must define a
•
line password before you can use this authentication method. Use the
password password line configuration command.
local—Use the local username database for authentication. You must
•
enter username information in the database. Use the username
password global configuration command.
radius—Use RADIUS authentication. You must configure the
•
RADIUS server before you can use this authentication method. For
more information, see the
section on page
11-4.
Enter line configuration mode, and configure the lines to which you want
to apply the authentication list.
Apply the authentication list to a line or set of lines.
•
If you specify default, use the default list created with the aaa
authentication login command.
•
For list-name, specify the list created with the aaa authentication
login command.
Configure the bridge to send its system name in the NAS_ID attribute for
authentication.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Chapter 11
Configuring RADIUS and TACACS+ Servers
"Identifying the RADIUS Server Host"
OL-4059-01
Advertisement
Table of Contents
