Configure The System Default Policy; Cable Modems; Pcs; Create Selection Tag Scopes - Cisco 7246VXR - uBR Router Software Configuration Manual

Chapter 7 Overview of the Cisco Network Registrar for the Cisco uBR7200 Series

Configure the System Default Policy

Add these options to the system default policy for:
•
•

Cable Modems

Define these settings following the CNR tool documentation:
•
•
•
•
•
•
•

PCs

Define these settings following the CNR tool documentation:
•
•

Create Selection Tag Scopes

General

When you create your scope selection tags:
Cut and paste the scope selection tag create commands from the scripts into the nrcmd> command line.
Step 1
Note These names have to be exactly as they appear in the scripts.
Step 2 Then attach the selection tags to the appropriate scripts:
Example:
CM_Scope tagCablemodem
PC_Scope tagComputer
OL-2239-03
Cable modems to support on your network
PCs to support behind each cable interface on your network
TFTP server (IP address) for those cable interfaces using BOOTP
Time-server (IP address)
Time-offset (Hex value, 1440 for Eastern Standard Time)
Packet-siaddr (IP address of CNR)
Router (set to 0.0.0.0)
Boot-file (name of .cm file for those cable interfaces using BOOTP)
Packet-file-name (.cm file name)
Domain name
Name servers (IP address of DNS servers)
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Configure the System Default Policy
7-5