Trunk Group Page (Spa8000); Line Enable Section; Network Settings Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference

Trunk Group page (SPA8000)

Trunk Group page (SPA8000)
Cisco Small Business ATA Administration Guide
On the SPA8000, you can use the Voice tab > Trunk Group pages (T1 ... T4) to
configure the Trunk Groups. This page includes the following sections:
•
"Line Enable section" section on page 191
•
"NAT Settings section" section on page 197
•
"Network Settings section" section on page 191
•
"SIP Settings section" section on page 192
•
"Subscriber Information section" section on page 195
•
"Dial Plan section" section on page 197
•
"Proxy and Registration section" section on page 205
Voice tab > Trunk Group page (SPA8000)>

Line Enable section

Line Enable
Voice tab > Trunk Group page (SPA8000)>

Network Settings section

SIP ToS/DiffServ
Value
SIP CoS Value [0-7] CoS value for SIP messages.
To enable this line for service, select yes. Otherwise, select
no.
The default is yes.
TOS/DiffServ field value in UDP IP packets carrying a SIP
message.
The default is 0x68.
The default is 3.
B
191