Hardware Installation - D-Link DHP-301 - PowerLine HD EN Starter User Manual

Section  - Installation

Hardware Installation

Power
Plug in the DHP-300 into an AC wall outlet or power strip. Note: Power source is confirmed when the green LED Power
Indicator on the DHP-300 is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector located on the DHP-300 and attach the other end
of the Ethernet cable to the network or PC. Network Connectivity is confirmed when the green LED Indicator on the
DHP-300 located left of the Power LED is illuminated.
D-Link DHP-300 User Manual