St2-Kp Keypad Control - Russound ST2 Installation Manual

ST2 OPERATION

ST2-KP KEYPAD CONTROL

ST2-KP Keypad Operation
1
Turning the keypad on/off
To activate the ST2-KP, press
power down the keypad display. The keypad remains
powered until the ST2 Tuner is turned off.
1
Selecting the desired tuner
To select a different tuner, press and hold
keypad has been hardware jumper-selected to Tuner
1 or Tuner 2, it will not switch between the two
tuners.) The backlight color of the display will be
green for Tuner 1 and amber for Tuner 2. Each time
a tuner is selected the display will refresh with the
current station or preset for that tuner, and all subse-
quent button presses and memory preset entries will
be associated with that selected tuner.
2
Selecting the desired band
Push to switch between AM or FM band.
3
Selecting the desired frequency
Use and for manual tuning. To move quickly
through the channels, press and hold either
for more than 1.5 seconds. European frequen-
cies show in .05 MHz increments.
4
Selecting a Bank
To select a bank, select the desired tuner, then press
and hold or to select the desired bank. The
bank name will show on the display.
4
Recalling a Memory Preset
To recall a memory preset, press and release
to scroll through the presets for the selected
bank. (Memory presets must be stored for ST2-KP
recall)
16
The 5-character backlit display shows frequency and
band, plus presets. Messages scroll twice, then dis-
play the first 5 characters.
. Press to
. (If the
or
or
5
ST2-KP Keypad Display
ST2-KP Keypad-Front Panel
4
5
3
2
3
1