Honeywell Ademco 8132-i User Manual page 66

Symphony/Symphony-i Setup (cont'd)
66
SCREEN ACTION
7. Begin the Touchscreen calibration from the
"Diagnostics" screen by pressing the
Calibrate button. When the Calibrate button is
pressed, the Touch Screen Calibration
screen is displayed.
8. Within the Touch Screen Calibration
screen you are asked to Press the center of
the box in upper left corner. Press the center
of the square.
When this square is touched, the Touch
Screen Calibration screen displays Next
press the box in the upper right corner.
9. Press the center of the square. The Touch
Screen Calibration screen displays Next
press the box in lower right corner.