Summary Of Audio Notification - Honeywell Ademco 8132-i User Manual

Symphony/symphony-i advanced user interface
Table of Contents

Advertisement

SOUND
Loud, Interrupted*
Fire Alarm
Keypad & External
Loud, Continuous*
Burglary/Audible Emergency
Alarm
Keypad & External
One Short Beep
a. System disarm
(not repeated)
b. System arming attempt
Keypad only
with an open zone.
c. Bypass verify
One Short Beep
System is in test mode
(once every 15
sec.) Keypad only
One Beep
Low battery at a transmitter
(every 60 sec.)
Keypad only
Two Short Beeps
Arm Away or Maximum
Keypad only
Three Short Beeps
a. Arm Stay or Instant
Keypad only
b. Zone opened while system
is in Chime Mode.
c. Entry warning**
Rapid Beeping
a. Trouble
Keypad only
b. AC power loss alert***
c. Memory of alarm
Slow Beeping
a. Entry delay warning**
Keypad only
b. Exit delay warning (if
programmed)
* If bell is used as external sounder, fire alarm is pulsed ring; burglary/audible
emergency is steady ring.

Summary of Audio Notification

CAUSE
FIRE is displayed; descriptor of zone in
alarm is displayed.
ALARM is displayed; descriptor of zone in
alarm is also displayed.
a. DISARMED/READY TO ARM is
displayed.
b. The number and descriptor of the open
protection zone are displayed.
c. Numbers and descriptors of the
bypassed protection zones are displayed
(One beep is heard for each zone
displayed). Subsequently, the following is
displayed: DISARMED BYPASS Ready to
Arm
Opened Zone identifications will appear.
LO BAT displayed with description of
transmitter.
ARMED AWAY or ARMED MAXIMUM is
displayed. Red ARMED indicator is lit.
a. ARMED STAY ZONE BYPASSED or
ARMED INSTANT ZONE BYPASSED is
displayed. Red ARMED indicator is lit.
b. CHIME displayed, descriptor of open
protection zone will be displayed if the [✱]
key is pressed.
c. DISARM SYSTEM OR ALARM WILL
OCCUR is displayed.
a. CHECK displayed. Descriptor of
troubled protection zone is displayed.
b. AC LOSS displayed (may alternate
with other displays that may be present).
c. FIRE or ALARM is displayed;
descriptor of zone in alarm is displayed.
a. DISARM SYSTEM OR ALARM WILL
OCCUR is displayed. Exceeding the delay
time without disarming causes alarm.
b. ARMED AWAY or ARMED MAXIMUM
is displayed along with You May Exit Now
DISPLAY
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ademco 8132

Table of Contents