Advanced System Features; More Choices; How To Clear A Control Panel Message - Honeywell 6272CV User Manual

Security (Cont'd)
carbon monoxide zone, pressing the CLEAR button and then
entering your user code.
Note: Contact your Central Station/Security Company for servicing if
you have further problems with your carbon monoxide system.

Advanced System Features

While most of the commonly used security functions are available
from the TouchCenter's advanced user interface, there are some less
used, advanced features that can either be accessed through Console
Emulation mode on the TouchCenter or a standard alpha keypad. To
use features not supported by the TouchCenter, refer to your Control
Panel User Guide.

More Choices

How to Clear a Control Panel Message

When a Control Panel Message is displayed, the user has two options.
a) User can clear the Control Panel Message immediately, or b) User
can minimize the window and clear it at a later time. Refer to the
section below to Hide the Control Panel Message.
SCREEN
28
ACTION
1. To clear Control Panel Messages,
press the CLEAR button.
2. Enter your Authorized Code.
3. Once your Authorized Code is
accepted, the Control Panel Message will
be cleared.
If the alarm is still present, press CLEAR
again and then enter your Authorized
Code again.