Honeywell 6272CV User Manual page 25

partition. (Note that
programmed by the installer can be accessed in this manner.)
To check the status of other partitions perform the following:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN
Security (Cont'd)
only those partitions
ACTION
2. Press the "Current Partition" tab (lower
edge of the screen; in this case it displays
P1H). The "User Authorization" screen is
displayed with the instructions "For
Authorized Partitions, Enter Code".
3. Enter the code authorized to access
other partition(s).
If the code is accepted, the system
displays the partitions that user has
access to.
Note: A code may have access to some
or all of the available partitions.
This screen displays the available
partitions (in this case, Partitions 1 (Main),
2, and 3), and their current status.
The current partition is shown at the top of
the display (in this example, the device is
attached to Partition 1 (P1H). To change
this assignment, select the appropriate
button (e.g. press P2 to switch control to
Partition 2).
Note: After leaving this screen when
using a residential panel, the selected
partition in the TouchCenter will
automatically revert back to the
TouchCenter's home partition after two
minutes. When using commercial panels,
you must select the TouchCenter's home
partition to return to it.
authorized and
25