Honeywell 6271CV User Manual page 25

Security System Operation (Cont'd)
SCREEN ACTION
2. Enter your 4-digit user code.
If the Arm Multi-Partitions button on the
"Armed" screen is not checked, the
TouchCenter beeps once, the system will
disarm, and the "Arming" screen is
displayed showing the system as Ready to
Arm or Not Ready Fault if any zone is
faulted (open).
If the Arm Multi-Partitions button on the
"Armed" screen is checked, the Partition
No. & Description screen is displayed
listing the partitions to which you have
access.
3. Press the DISARM ALL button if you
wish to disarm the system. The
TouchCenter beeps once and the "Arming"
screen is displayed showing the system as
Ready to Arm or not ready if any zone is
faulted (open).
Note: If you wish to disarm only selected
partitions, you must first highlight the
partition(s) to be disarmed, then press the
DISARM SELECTED button. The
TouchCenter beeps once and the "Arming"
screen is displayed showing the system as
Ready to Arm or not ready if any zone is
faulted (open).
Note: Once the system is disarmed, the
TouchCenter will return to the "Home"
screen after the selected "To Home Page
After" time has expired. This time is
selected on the "Setup" screen.
25