Network Setup; Network Environment; Introducing Useful Network Programs; Using A Wired Network - Dell 1135 Mono Laser User Manual

Network setup

This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:

Network environment

Introducing useful network programs

Using a wired network

Installing network connected machine's driver
IPv6 Configuration
Network environment
You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic
network settings through the machine's control panel.
The following table shows the network environments supported by the machine:
Item
Network interface
Network operating system
Network protocols
Introducing useful network programs
There are several programs available to setup the network settings easily in network environment. For the network
administrator especially, managing several machines on the network is possible.
Before using the programs below, set the IP address first.
Embedded Web Service
Web server Embedded on your network machine, which allows you to:
Configure the network parameters necessary for the machine to connect to various network environments.
Customize machine settings.
(See Using Embedded Web
SetIP
This utility program allows you to select a network interface and manually configure the IP addresses for use with
the TCP/IP protocol (See
TCP/IPv6 is not supported by this program.
Using a wired network
You must set up the network protocols on your machine to use it on your network. This chapter will show you how this
is easily accomplished.
You can use network after connecting network cable to a corresponding port on your machine.
Ethernet 10/100 Base-TX
Windows 2000/XP/2003/2008/Vista/7/2008 Server R2
Various Linux OS
Mac OS X 10.3 ~ 10.6
TCP/IPv4
DHCP, BOOTP
DNS, WINS, Bonjour, SLP, UPnP
Standard TCP/IP Printing(RAW), LPR, IPP
SNMPv 1/2/3, HTTP(S), IPSec
TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP(S), IPSec)
(See IPv6 Configuration).
Service).
IP setting using SetIP Program (Windows)
Requirements
or IP setting using SetIP Program (Macintosh)).