Advertisement
Quick Links
Introduction
The UB-R02 is an interface board on which is installed an IEEE 802.11b Radio
Frequency (RF) module for EPSON
This manual provides instructions, including a simple setup for operators of
POS systems in which the UB-R02 is installed so that the operators can use the
UB-R02 safely and correctly.
Key to Symbol
The symbol in this manual is identified by its level of importance, as defined
below. Read the following carefully before handling the product.
Note:
Notes have important information and useful tips on the operation of your equipment.
Features and Functions
❏
64/128-bit WEP
❏
Protocols: TCP, UDP, ICMP, IP, LP/LPR (for APD), TCP socket port (for
OPOS)
❏
Transfer rate: up to 11 Mbps, depending on operating environment
❏
OPOS, APD support
Part Names
The following view shows the part names of the UB-R02.
Note: This photograph shows the TM-T88III printer with the UB-R02 installed.
UB-R02 User's Manual
Push button
Copyright © SEIKO EPSON CORPORATION 2004
®
TM printers.
Drawer kick-out
connector
1
404861602
Printed in Japan 2004.01
Power supply
connector
Advertisement
Related Manuals for Epson C32C824161 - UB R02 Print Server
Summary of Contents for Epson C32C824161 - UB R02 Print Server
-
Page 1: Features And Functions
UB-R02 User’s Manual 404861602 Copyright © SEIKO EPSON CORPORATION 2004 Printed in Japan 2004.01 Introduction The UB-R02 is an interface board on which is installed an IEEE 802.11b Radio ® Frequency (RF) module for EPSON TM printers. This manual provides instructions, including a simple setup for operators of POS systems in which the UB-R02 is installed so that the operators can use the UB-R02 safely and correctly. -
Page 2: Dip Switches
DIP Switches When using this interface board, the interface of the TM printer must be selected as “parallel” with the appropriate settings. Set the reset signal for pin 31 to “enable,” if you are using a TM printer that has this setting. Refer to the manual for each TM printer for details. -
Page 3: Emc Standards Applied
Select the product name from the “Select any product” pull down menu. EMC Standards Applied Product Name: UB-R02 Model Name: M195A The following standards are applied only to the interface boards that are so labeled. (EMC is tested using the EPSON power supplies and TM series printers.) Europe: CE marking... -
Page 4: New Zealand
Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko...