Configuring Wep - NETGEAR MBR1200 User Manual

Table 6. Wireless Settings (Continued)
Settings
Security Options None
WEP
WPA-PSK (TKIP)
WPA2-PSK (AES)
WPA-PSK (TKIP) +
WPA2-PSK (AES)

Configuring WEP

If you use a wireless computer to configure wireless security
Note:
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the router from a wired computer to make further changes.
To configure WEP data encryption:
Log in to the router as described in
1.
From the main menu, select Wireless Settings to display the Wireless Settings screen.
2.
28 | Chapter 2: Wireless Network Configuration
Mobile Broadband 11n Wireless Router MBR1000 User Manual
Description
You can use this setting to establish wireless connectivity before
implementing wireless security. NETGEAR strongly recommends that
you implement wireless security.
Use encryption keys and data encryption for data security. You can
select 64-bit or 128-bit encryption. See
page 28.
Allow only computers configured with WPA to connect to the router.
See Configuring WPA, WPA2, or WPA + WPA2
page 29.
Allow only computers configured with WPA2 to connect to the router.
See Configuring WPA, WPA2, or WPA + WPA2
page 29.
Allow computers configured with either WPA-PSK or WPA2-PSK
security to connect to the router. See
WPA2, or WPA + WPA2
Logging In to Your Router
Configuring WEP
Configuring WPA,
on page 29.
on page 11.
on
on
on