Table of Contents
Advertisement
DNS-120 User's Manual
Hardware Installation
1
Attach the provided Ethernet cable to the Ethernet port on the rear panel.
2
Attach the other end of the Ethernet cable to an available Ethernet port on
your router or switch.
3
Plug the AC adapter into the receptor located on the back of the device. Plug
the other end of the AC Adapter into a power strip or wall outlet.
4
Attach your USB drive(s) to the USB port(s) on the rear panel of the DNS-120.
The USB LED on the front panel will blink until the drive has been installed.
Once the USB LED is solid green, your USB drive is ready for use.
D-Link Systems, Inc.
Hardware Installation
9
Advertisement
Table of Contents
