D-Link DNS-1550-04 Quick Installation Manual
4-bay smb rack-mount unified network storage enclosure
Hide thumbs
Also See for DNS-1550-04:
- User manual (163 pages) ,
- Quick installation manual (65 pages) ,
- Quick installation manual (61 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DNS-1550-04
Summary of Contents for D-Link DNS-1550-04
-
Page 1: Quick Installation Guide
Quick Installation Guide 4-Bay SMB Rack-mount Unified Network Storage Enclosure This document will guide you through the basic installation process for your new D-Link DNS-1550-04. DNS-1550-04 Documentation also available on CD and via the D-Link Website... -
Page 2: Installation Steps
This installation guide provides basic instructions for installing the DNS-1550-04 on your network. For additional information about how to use the DNS-1550-04, please see the User Manual which is available on the CD included in this package or from the D-Link support website. -
Page 3: Hardware Overview
• System ready: green System Status LED • Disk array degrade: orange • Disk array offline/ Enclosure error: red Enable one-touch backup. Flashing green while One-Touch Backup Button backup is processing Power Button Power on/off the NAS D-Link DNS-1550-04 Quick Installation Guide... -
Page 4: Rear Panel
USB 4 ports RJ45 Network Connection Power Connection Item Description USB Connection For USB printer and flash drive backup RJ45 Network Connection For Ethernet cable connection Reset Button Reset system configuration Power Connection Redundant power supply D-Link DNS-1550-04 Quick Installation Guide... -
Page 5: Hardware Installation
3. Hardware Installation Open the shipping carton for the DNS-1550-04 and carefully remove and unwrap its contents. To install DNS-1550-04 on your local network, refer to the steps below: 3.1 Installing Disk Drives To install disk drives: 1. Remove the disk tray from the device by the following steps: a. -
Page 6: Connecting The Ethernet Cable
• Install four screws per drive. • Snug each screw. Be careful not to over-tighten. 4. Reinstall the drive tray into the DNS-1550-04 enclosure. Tip: Repeat steps 1 through 4 until all of your disk drives are installed. 3.2 Connecting the Ethernet Cable To connect the DNS-1550-04 to your network: 1. -
Page 7: Connecting The Power
1. Attach the power cord on the back of the DNS-1550-04 enclosure and plug the other end into the power source. Power Connections 2. On the front of the DNS-1550-04, press the power button. It takes about a minute to boot up. When fully booted: •... - Page 8 Click NAS tab > Wizard. • • Click the One-Click Setup button. The Automatic Configuration box will appear: • The Summary window displays the general information of the system, including Computer Name, IP Address and Storage Type. D-Link DNS-1550-04 Quick Installation Guide...
- Page 9 5. The Summary window displays the general information of the system, including Computer Name, IP Address and Storage Type. To accept the proposed configuration, click the Submit button. Your DNS-1550-04 setup is now complete. Connecting Share Folders from Windows 1. Open Explorer and type \\IP address (\\192.168.0.32 by default) 2.
- Page 10 Notes D-Link DNS-1550-04 Quick Installation Guide...
- Page 11 Notes D-Link DNS-1550-04 Quick Installation Guide...
-
Page 12: Contacting Technical Support
• Serial Number (s/n number located on the label on the bottom of the access point). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. United States:...