Storing/Copying A Preset - DigiTech RP 2000 User Manual

Storing/Copying a Preset

Once you have modified the Parameters and Effects to your liking, you can store them to a User Preset location.When
editing a Preset, the Store LED will light indicating that you have changed a Parameter and need to store the changes.
The following steps outline the procedure for storing a Preset
1. Press the Store button once and the RP2000 will enter a naming mode.The first letter of the currently loaded
Preset name will begin to flash.
2. Pressing the Rhythm button will select the next character to the right, and pressing the FX Edit button will select
the next character to the left. Rotate the Data Wheel to change the selected character.
3. Once you have entered the desired name for the Preset, press the Store button again.The current Preset location
will flash in the Display.This is asking you to select a User Preset location where you want your sound to reside.
4. Select the User Preset location using the Data Wheel.
5. Press the Store button again to save the changes.
The procedure for copying one Preset to another Preset location is the same. Simply use the Data Wheel to select the
Preset that you want to copy, then follow the steps listed above.
RP2000 User's Guide
Section Two - Editing Functions