Mounting - Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual
User guide
Hide thumbs
Also See for 7600BP-112-B6EE - Hand Held Products Dolphin 7600:
- User manual (144 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
Mounting
If you want to mount to a vertical surface, be sure to provide enough workspace with good lighting for the
user to view and operate the Dolphin terminal while it is seated in the base.
Back Panel Dimensions
.32 in.
8.06mm Diameter,
2 places
Mounting Guidelines
1. Before you begin, make sure you have two screws that are size #4–diameter measurement of 0.112
in. (2.845 mm).
2. Drill two holes into the wall. The holes should be located approximately 1.44 in. (36.7 mm) apart.
3. Insert a screw into each hole, leaving 0.2 in. (5 mm) of its head exposed.
10 - 6
.15 in.
(3.85 mm.)
4.35 in.
(110.47 mm.)
Rev C
11/17/2008
1.44 in.
(36.7 mm.)
.53 in.
13.65mm,
2 places
1.85 in.
(46.87 mm.)
®
Dolphin
7600 Mobile Computer
3.99 in.
(101.42 mm.)
User's Guide
Advertisement
Table of Contents
