Charging The Main Battery - Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin 7600 User Manual

Charging the Main Battery

Battery packs achieve a full charge in less than four hours.
As battery packs charge, the charging circuitry follows the two-step
charging process (CC-CV) that is recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1. Install the battery pack in the terminal; see
on page 2-1.
2. Power the base; see
3. Slide the terminal into the terminal well until the Dock LED lights
green to indicate that the terminal is properly seated.
4. The battery pack begins charging.
Checking Battery Power
To check battery power while the terminal is operating,
tap Start > Settings > System tab > Power
®
Dolphin 7600 Mobile Computer
User's Guide
Install the Main Battery
Power on page 10-4.
11/17/2008
.
Rev C 10 - 5