Wireless-G Exterior Access Point
The Reset Button and Ground
The Access Point's Reset button and ground are located on the back panel.
Reset Button
There are two ways to Reset the Access Point's factory defaults. Either press the Reset
button, for approximately ten seconds, or restore the defaults using the Access Point's
Web-based Utility.
Ground
Before you mount the Access Point, you must ground the Access Point (to a large piece of
metal) as a precaution against electric shock.
Chapter 3: Getting to Know the Wireless-G Exterior Access Point
The Reset Button and Ground
Figure 3-4: Back Panel
Reset But-
ton
Ground
IMPORTANT:Resetting the Access Point
will erase all of your settings (including
wireless security, IP address, and power
output) and replace them with the factory
defaults. Do not reset the Access Point if
you want to retain these settings.
8