Casio YW-2L - Wireless LAN For Projector Connecting Manual page 24

To switch the Data Projector connection profile
1
On the Data Projector's remote controller, press the [ ] key.
This will cause the connection profile menu to appear in the projection area.
2
Use the [ ] and [ ] keys to move the highlighting to the connection profile you
want to select and then press the [ENTER] key.
This displays the dialog box shown below.
3
Press the [ ] key to move the highlighting to "Yes" and then press the [ENTER]
key.
This will switch to the Data Projector connection profile you highlighted in step 2 and
then display the "Standing by for connection..." message.
The currently selected connection
profiled is highlighted.
This is the display of the connection
profile name after switching.
24