Cisco SGE2000 Reference Manual page 155

• MAC Address — Specifies the MAC address for which the table is queried.
• VLAN ID — Specifies the VLAN ID for which the table is queried.
• Address Table Sort Key — Specifies the means by which the Dynamic MAC Address Table is
sorted. The address table can be sorted by address, VLAN, or interface.
2. Define the relevant fields.
3. Click Apply. Dynamic addressing is defined, and the device is updated.
Chapter 8: Defining Address Tables
Defining Dynamic Addresses
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Chapter
8
147