Removing and Replacing a DC PEM
Install the new power supply:
Step 4
a.
To prevent damage to the power shelf backplane connector, do not use excessive
Caution
force when inserting the power supply into the chassis.
b.
Figure 6-18
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-34
Slide the power supply into the bay until it mates with its backplane
connector.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the backplane connector
Seating the DC Power Supply
Chapter 6
(Figure
6-18).
O U TP U T
IN P U T
O K
M IS W IR
E
O K
Maintaining the Router
OL-11497-03