Setting The Default Device Load; Adding A New Device - Cisco 7935 - IP Conference Station VoIP Phone Administration Manual

Preparing to Install

Setting the Default Device Load

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Adding a New Device

Step 1
Step 2
Step 3
Step 4
Cisco IP Conference Station 7935 Administration Guide
2-2
To set the default device load for the IP Conference Station in
Cisco CallManager, perform these steps.
Copy the IP Conference Station load to C:\Program Files\Cisco\TFTPPath on the
Cisco CallManager server.
Start Cisco CallManager Administration.
Choose System > Device Defaults.
In the Device Defaults Configuration window, scroll down to the Cisco 7935
Device Type.
Set the Load Information to the load in TFTPPath.
Scroll back to the top of the page and click Update.
To add the IP Conference Station as a new device in Cisco CallManager, perform
these steps.
Choose Device > Add a New Device.
The Add a New Device page displays.
Choose Phone from the Device Type drop-down list box, and click Next.
The Add a New Phone page displays.
Choose the the Cisco 7935 phone type and click Next. (Once you select a phone
type, you cannot modify it.)
The Phone Configuration page displays.
Enter the required fields as described in the following table.
Chapter 2 Installation of the Cisco IP Conference Station 7935
78-12727-03