Operating Your Breville Ikon Froojie Juice Fountain; Preparation Of Fruit And Vegetables For Froojile Extractor; With Juice Extractor Or Froojle Extractor - Breville BJE520 Instructions And Recipes Manual

operating your Breville ikon™ froojie™ juice fountain
prepArAtIoN of fruIt ANd vegetABles
for froojIe™ extrACtor
• Only soft fruits should be used with the Froojie™
Extractor.
• When using fruits with hard inedible skins, such
as mangoes, pineapple or kiwi fruit, always peel
before juicing.
• When using fruits with a hard core such as
pineapple, always remove this before juicing.
• All fruits with pits, hard seeds or stones such as
nectarines, peaches, mangoes and apricots must
be pitted or deseeded before juicing.
• Passionfruit pulp, peeled kiwi fruit and berries can
be processed without removing seeds.
When using the froojie™ extractor, use low
speeds (speed 1 or 2). Always ensure motor is
running before adding fruit and/or vegetables to
feed tube.
froojIe™ extrACtor
Apricots (stone removed)
Bananas (peeled)
Kiwi fruit (peeled)
Mangoes (peeled, stone removed)
Melons (peeled)
Pears soft (stalk and core removed)
Pineapple (peeled and cored)
Raspberries
Strawberries (stalks removed)
Tomatoes (cored and quartered)
Watermelon (peeled, seeds removed)
Use speed 2 to push out any
remaining fruit pulp in juice collector
12
WItH juICe extrACtor or froojIe™
extrACtor
step 1
Wash selection of fruit and vegetables to be juiced.
most fruit and vegetables such as apples,
carrots and cucumbers will not need to be cut or
trimmed to size as these will fit whole into the
feed chute. ensure vegetables such as beetroot,
carrots, etc. have all soil removed, are well
washed and trimmed of leaves before juicing.
step 2
Based on the type of fruit or vegetable you are juicing/
pureeing select either the Juice Extractor or the
Froojie™ Extractor.
Note

WArNINg: do Not put HArd
fruIt ANd vegetABles (I.e. CArrots,
speed
Apples, fresH Beetroot, etC.) or
1
ICe tHrougH juICer WHeN usINg
1
froojIe™ extrACtor. tHIs Could
dAmAge pArts of tHe uNIt.
1
1
step 3
1
Ensure the ikon™ Froojie™ Juice Fountain
1
correctly assembled. Refer to Assembling your Breville
1
ikon™ Froojie™ Juice Fountain
1 juice jug (or a glass) is placed under the spout and
the pulp container is in position before commencing
1
juicing.
1
step 4
1
Plug the power cord into a 230/240V power outlet.
2
Turn the power on at the power outlet. The LCD
display will illuminate.
®
Note
is
®
(page 8). Ensure the
®