Disassembling Your Breville Juice Fountain ™ Plus - Breville BJE410 Instructions Manual

disassembling your Breville juice fountain
step 1
Ensure the Juice Fountain Plus is turned off by
™
pushing the speed switch up or down to the 'Off'
position.
Then switch the appliance off at the power outlet
and unplug the cord.
step 2
Remove the pulp container by tilting the motor base
slightly to the right and unlatch it from under the
juicer cover.
2
step 3
Place both hands on either side of the safety
locking arm and pull back and lift over the grooves
on either side of the juicing cover.
3a
1
plus
™
Lower the safety locking arm down out of position.
3B
step 4
Lift the juicer cover of the Juice Fountain Plus.
™
4
disassembling your Breville juice fountain
continued
step 5
To remove the filter bowl surround with the
stainless steel filter basket, still in place, hold base
of the juicer and turn filter bowl surround by the
juice spout.
5
step 6
Lift off the filter bowl surround with the stainless
steel filter basket still in place.
6
THE STAINLESS STEEL FILTER BASKET CONTAINS SMALL SHARP BLADES TO CUT AND
PROCESS FRUIT AND VEGETABLES. AVOID TOUCHING THE BLADES WHEN HANDLING THE
FILTER BASKET.
1
plus
™
step 7
To remove the stainless steel filter basket from
the filter bowl surround, insert fingers under the
grooves marked "lift basket' and lift filter basket
up. For easy cleaning, it is recommended to remove
filter basket over the sink.
7a
FILTER BASKET CAUTION:
SHARP BLADES
7B
1