NEC Application and Driver CD
Use the NEC Application and Driver CD to reinstall NECC-provided
software, including
applications
!
utilities and device drivers
!
the NEC INFO Center (online documentation).
!
You can also use the NEC Application and Driver CD at any time to
restore an application, driver, or utility.
Note
CD, the full restore process loads all the factory-installed software that
came with your system.
If you add NECC hardware options specified for your system, you can use
the NEC Application and Driver CD to install the drivers for the options.
Install the software from the NEC Application and Driver CD as follows.
Power on your system.
1.
Insert the auto-start Application and Driver CD into the CD-ROM
2.
drive. The Selective Restore screen appears, prompting you to select
an application or driver from the list.
Click on an application, driver, or utility in the
3.
"Applications/Drivers:" window.
Read the information given in the "Important Setup Information:"
4.
window.
Click
5.
instructions to install your selection.
Click
6.
Remove the CD from the CD-ROM drive when the installation is
7.
complete.
If you perform a full system restore using the NEC OS Restore
to install your selection. Follow any on-screen
Install
to close the Application and Driver program.
Exit
Configuring the System 3-35