Download Print this page

Advertisement

Quick Links

Electronic User's Guide
Electronic User's Guide
Electronic User's Guide
Electronic User's Guide
September 2007
- 1 -

Advertisement

loading

Summary of Contents for NEC POWERMATE - VERSION 2007

  • Page 1 Electronic User’s Guide Electronic User’s Guide Electronic User’s Guide Electronic User’s Guide September 2007 - 1 -...
  • Page 2 Copyright POWERMATE User’s Guide, Copyright © 2007 NEC Computers Asia Pacific Sdn. Bhd. (418989-A) (“NECCAP”). All Rights Reserved. No part of this manual may be reproduced or transmitted, in any form or by any means, whether electronic, chemical, manual or otherwise, including but not limited to photocopying, recording, or information storage and retrieval systems, for any purpose without prior written permission of NECCAP.
  • Page 3 NECCAP guarantees that this product is 100% virus free. Please take the following precautions to protect your system against new viruses: • Do not use illegal copies of software protected by copyright. • Run an antivirus program and update it regularly. •...
  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS Cables Please make sure that cables are not strained and that there is no risk of people walking or tripping over them. Also make sure that other devices do not place stress on the cables. Make sure that power cords are connected to a grounded electrical outlet.
  • Page 5 System Signal Cable & Power Cable Keyboard & Mouse* Wireless Keyboard* User Guide* *For specific models only If the items are not found in the packaging box, it means that the item is not applicable to the system you purchased, hence it is not included for you in the system. To synchronize the wireless mouse and keyboard with your POWERMATE P 1.
  • Page 6 4. Synchronize the keyboard with your POWERMATE P. Step 2: i. Press the connect button (about 2 seconds) at the back of POWERMATE P. ii. You can see green light is blinking. iii. Press the connect button at the back of keyboard (about 5 seconds) and released. iv.
  • Page 7 IMPORTANT Windows® Language Selection *This option is applicable for Hong Kong Dual Boot models only. ® Your PC has already been pre-installed with 2 language versions of Windows; Vista operating system, that is English, and Traditional Chinese. When you start your system for the first time, you are required to choose either one of the operating system language you prefer (Please refer to the picture below).
  • Page 8 Enter a computer name then choose a desktop background out of 6 options provided at bottom of the screen (3 backgrounds are provided by Windows on the left hand side & 3 backgrounds are provided by NEC on the right hand side). Click the Next button. 5. Help protect Windows automatically screen.
  • Page 9 Memory Slot USB Port with Charger * IEEE 1394 Port LCD Display PC Card Slot Power Button PC Card Eject Button One Touch Button Microphone In Hard disk & ODD Access LED Headphone Out Memory Access LED * This USB Port allows you to charge your USB compatible devices e.g. Mobile Phone, MP3 player without turning on your PC.
  • Page 10 To position the Gadget Box - 10 -...
  • Page 11: Installation

    Web Camera Web Camera Stand Installation To turn on the web camera - 11 -...
  • Page 12 Windows and NEC have included powerful tools on your computer. Before you contact NEC, please try the following: • Use NEC Smart Restore to reinstall any of the software or drivers that are supplied with your computer. If you need to reinstall software or drivers for other items, please check the user manual supplied with the product, or the manufacturer’s website.
  • Page 13 Hardware Before purchasing a new hardware device, make sure you check that it is compatible with your computer. Please check the compatibility with the sale representative, retailer or manufacturer. Internal hardware component If you wish to install an internal hardware component, it will be necessary to open your computer. For best results, an authorised service provider should perform such installation.
  • Page 14: Modifications To The Product

    MODIFICATIONS TO THE PRODUCT Radio Frequency Interference The manufacturer is not responsible for any radio or TV interference caused by unauthorised modifications to this equipment. Safety Warning The manufacturer is not responsible for any safety hazard caused by unauthorised modifications to this equipment.
  • Page 15 Cables The EMC performance of the system is guaranteed only if the cable and interface use efficient shielding. The use of shielded interface cable is required for USB, IEEE1394, serial, printer, game, analogue or digital audio/video, Ethernet LAN, PS2, TV or FM antennas, and generally all high speed cable’ interfaces. Only Ethernet LAN or RTC modem cables can have lengths exceeding 3 meters.
  • Page 16 The optical devices are tested and certified to be compliant with International Electro-technical Commission IEC825-1 and European Norm EN60825-1 and EN60825-2 regulations for Class 1 laser products. Class 1 laser products are not considered hazardous. The optical devices are designed such that there is never human access to laser radiation above a Class 1 level during normal operation or prescribed maintenance conditions.
  • Page 17 This section describes the basics for setting up a healthy work environment. Please consider the following suggestions when setting up a comfortable work area. Lighting Be sure your work place is well-lit. If the lighting in your room is not bright enough, use a desk lamp to provide light where you need it.
  • Page 18: Useful Accessories

    Using your Computer Comfortably Posture Sit with your back relaxed, and your hips and knees at an approximate 90-degree angle to your chair’s seat. If necessary, adjust your chair so that your thighs are roughly parallel to the floor, and your feet are flat. If your feet cannot reach the floor, please use a footrest.
  • Page 19 10 GB of your hard disk drive. This backup partition is hidden. The NEC Recovery Program can restore your computer to the same state as when you purchased it, while giving you an option to retain all settings and personal data for later retrieval.
  • Page 20 Before using the NEC Recovery Program it is recommended that you FIRST try fixing your computer with Windows Vista ® System Restore. System Restore can be used to restore your computer to a previous state when it was known to function correctly, without affecting your personal data files (such as documents, browsing history, drawings, favourites, or e-mails).
  • Page 21 Disconnect any additional devices that you have connected to your computer (e.g. scanner, printer, etc.) Starting The NEC Recovery Program For notebook, before starting the NEC Recovery Program, please make sure your computer is in AC mode. To launch the NEC Recovery Program: Press the <F8>...
  • Page 22 Select “User Name” & “Password” (if available). Then click “OK” button. At System Recovery Options, choose “NEC Recovery Tools”. Click “Next” button to continue. Select either “Partial Recovery” or “Full Recovery”. Then click “Next” button to continue. - 22 -...
  • Page 23 Please wait a while for the recovery process to be completed. The NEC Recovery tools application will close automatically after the recovery is completed. Finally you have to restart your computer by clicking the “Restart” button at System Recovery Options.
  • Page 24 If you wish to perform a Full Recovery: Full Recovery will remove all your personal data and restore your computer to its original factory state. Select Full Recovery and click on Next. Then follow the on-screen instructions to complete the recovery. If you wish to perform a Partial Recovery: 1.
  • Page 25 CUSTOMER of NEC (see point 4 for details on how to register your purchase). NEC shall not be liable for any special, incidental or consequential damages or for loss, damage or expense directly or indirectly arising from customers use or inability to use the equipment, or for personal injury or loss or destruction of any other property.
  • Page 26 Warranty, NEC reserves the right to charge the customer its reasonable cost of providing the service. If you are required to ship the Product to NEC or its Authorized Service Provider for service, it must be securely packed (in the original packaging) and insured for shipment, as NEC does not accept liability for loss or damage to the Product.
  • Page 27 Before shipping, or before any service is provided, you are strongly advised to copy or backup all data you may have on your hard disk drive. Neither NEC nor its Authorized Service Provider is responsible for any loss or destruction of data or media resulting from the service/s performed hereunder.
  • Page 28 “Masa Garansi” berlaku dari tanggal pembelian perlanggan yang terdapat pada bukti pembelian pelanggan yang diperoleh dari distributor resmi NEC Computer dan masa berlaku garansi berakhir setelah 12 bulan dari tanggal pembelian. Perangkat keras produk-produk NEC terbuat dari bahan-bahan yang telah di uji coba untuk memenuhi Standar quality yang dijamin oleh NEC.
  • Page 29 Tehnisi Jasa Pelanggan akan berusaha untuk mengatasi masalah anda melalui telepon. Apabila masalah tidak dapat diatasi maka anda perlu membawa produk kepada NEC untuk di analisa lebih lanjut atau diperbaiki.
  • Page 30 Return Material Authorization/Authorisasi Pemgembalian Material (RMA/TPM) nomor harus terpapar jelas pada paket. NEC atau Jasa Perbaikain Resmi berhak untuk tidak melakukan perbaikain dimana pun apabila menurut mereka performa jasa yang diberikan sangat riskan untuk keselamatan merekan atau rekan mereka. Anda harus menghubungan NEC melalui telepon untuk memperoleh nomor authorisasi dan mengirim ke alamat sebelum melakukan pengiriman produk apapun ke NEC.
  • Page 31 0800 200 632 (Diluar Auckland) Untuk menjamin agar anda mendapatkan tanggapan sesegera mungkin untuk permintaan jasa di masa yang akan datang kami menghimbau anda untuk segera mendaftar. Kunjungi website kami di www.nec-computers-ap.com untuk mendaftarkan Perpanjang Masa Garansi NEC anda SEKARANG. - 31 -...

This manual is also suitable for:

Powermate