Installing A Power Supply/Cooling Fan Module - Dell PowerVault E03J Series Hardware Owner's Manual

Installing a Power Supply/Cooling Fan Module

1 Slide the power supply/cooling fan module into the chassis until it is fully
seated and the release tab clicks into place. See Figure 3-9.
2 Connect the power cable to the power supply/cooling fan module and plug
the cable into a power outlet.
3 Secure the power cable using the Velcro strap. See Figure 3-10.
Figure 3-10. Securing the Power Cable
Velcro strap
1
CAUTION:
When connecting the power cable, secure the cable with the Velcro
strap.
NOTE:
If the enclosure is powered on, all the power supply LEDs remain off until
the AC power cable is connected to the power supply/cooling fan module and the
power switch is turned on.
4 Turn on the power supply/cooling fan module.
Installing Enclosure Components
1
41