Choosing The Input Signal; Better Sound Using Phase Control And Full Band Phase Control; Using Phase Control - Pioneer Elite SC-25 Operating Instructions Manual

06 Listening to your system

Choosing the input signal

On this receiver, it is possible to switch the input signals
for the different inputs as described below.
SC-27:
SOURCE
TV
CH VOL
TVCONTROL
SC-25:
INPUT
SELECT
1
SIGNAL SEL SIGNAL SEL MCACC
4 4
SBch A.ATT
7
D.ACCESS CH LEVEL
/CLR
1 Set the remote control to the receiver operation
mode.
2 Press SIGNAL SEL to select the input signal
corresponding to the source component.
Each press cycles through the options as follows:
• AUTO – The receiver selects the first available signal
in the following order: HDMI; DIGITAL; ANALOG.
• ANALOG – Selects an analog signal.
• DIGITAL – Selects an optical or coaxial digital signal.
• HDMI – Selects an HDMI signal.
• PCM – For PCM input signals.
the first available signal in the following order: HDMI;
DIGITAL.
When set to DIGITAL, HDMI or AUTO (only selected
DIGITAL or HDMI), the indicators light according to the
signal being decoded, as follows:
– 2 DIGITAL lights with Dolby Digital decoding.
– 2 DIGITAL PLUS lights with Dolby Digital Plus
decoding.
– 2 TrueHD lights with Dolby TrueHD decoding.
– DTS lights with DTS decoding.
Note
1 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats.
The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Master Audio, SACD and DVD Audio (including 192 kHz). With other digital signal formats, set to ANALOG (the
MULTI CH IN, TUNER and PHONO).
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital
connections (page 35) and set the signal input to DIGITAL.
• Some DVD players don't output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
2 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver.
3 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
68
en
1
THX MPX PQLS
AUTO/ALC/
STANDARD ADV SURR
DIRECT STEREO
PGM MENU
RECEIVER RECEIVER
SIGNAL SEL SLEEP SIGNAL SEL DIMMER
A.ATT SBch MCACC
VOL
HDMI OUT
ANT MPX PQLS
HDMI OUT
CH
AUDIO INFO
2 3
DISP
SLEEP
MULTI OPE TV CTRL RECEIVER RECEIVER
5 6
REMOTE
DIMMER
SETUP
8 9
CLASS
ZONE 2 ZONE 3
MAIN
0
ENTER
2
3
The receiver selects
– DTS HD lights with DTS-HD decoding.
– MSTR lights with DTS-HD Master Audio decoding.
– 96/24 lights with DTS 96/24 decoding.
– WMA9 Pro lights to indicate that a WMA9 Pro signal
is being decoded.
MEMORY • HDMI is not assigned by default. To select an HDMI
signal, conduct the input setup procedure (see The
Input Setup menu on page 48).
AUDIO
INFO
Better sound using Phase Control and
DISP
Full Band Phase Control
This receiver is equipped with the two types of functions
that correct phase distortion and group delay: Phase
MEMORY
Control and Full Band Phase Control. Activating Full
Band Phase Control is strongly recommended because it
also involves the effects of Phase Control. For details on
each of these two features, refer to the following
explanations.

Using Phase Control

During multichannel playback, LFE (Low-Frequency
Effects) signals as well as low-frequency signals in each
channel are assigned to the subwoofer or the other most
appropriate speaker. At least in theory, however, this type
of processing involves a group delay that varies with
frequency, resulting in phase distortion where the low-
frequency sound is delayed or muffled by the conflict
with other channels. With the Phase Control mode
switched on, this receiver can reproduce powerful bass
sound without deteriorating the quality of the original
sound (see illustration below).
Phase Control OFF
Sound
source
• Rhythms blurred and difficult to hear
• Bass sound with loss of depth
• Sound of musical instruments with no reality
Front speaker
Listening
position
Subwoofer
Sound muffled due
to a delay in time