Problems When Using The Auto Mcacc Setup; The Input Setup Menu - Pioneer Elite SC-25 Operating Instructions Manual

04 Basic Setup

Problems when using the Auto MCACC Setup

If the room environment is not optimal for the Auto
MCACC Setup (too much background noise, echo off the
walls, obstacles blocking the speakers from the
microphone) the final settings may be incorrect. Check
for household appliances (air conditioner, fridge, fan,
etc.), that may be affecting the environment and switch
them off if necessary. If there are any instructions
showing in the front panel display, please follow them.
• Some older TVs may interfere with the operation of
the microphone. If this seems to be happening,
switch off the TV when doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input Setup menu
if you didn't hook up your digital equipment according to
the default settings (see Input function default and
possible settings on page 49). In this case, you need to
tell the receiver what equipment is hooked up to which
terminal so the buttons on the remote control
correspond to the components you've connected.
SC-27:
MAIN
RECEIVER RECEIVER SOURCE
ZONE2 3
MULTI
OPERATION
DVD BD TV DVR
HOME MEDIA
VIDEO1 VIDEO2 HDMI GALLERY
USB
iPod CD CD-R TUNER
MULTI CH
PHONO IN XM SIRIUS
SC-25:
RECEIVER RECEIVER SOURCE
DVD BD DVR HDMI
HOME MEDIA
TV CD CD-R GALLERY
iPod USB TUNER XM SIRIUS
INPUT
1 Switch on the receiver and your TV.
Use  RECEIVER to switch on.
2 Set the remote control to the receiver operation
mode, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options
on page 90), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.
48
en
INPUT MUTE
AUDIO
PARAMETER
TUNE
LIST
TOP MENU
BAND
SOURCE
TV RECEIVER RECEIVER
PRESET
ENTER ENTER
CH VOL
CATEGORY
VOL
HOME HOME
MENU MENU
TUNE
iPod CTRL
STATUS PHASE CTRL
TV CONTROL
AUDIO VIDEO
ANT MPX
PARAMETER PARAMETER
LIST TUNE TOOLS
AUDIO INFO
TOP MENU T.EDIT
BAND GUIDE DISP
MULTI OPE TV CTRL
PRESET ENTER ENTER PRESET
REMOTE
SETUP
CATEGORY RETURN RETURN
HOME HOME
ZONE 2
TUNE
MENU MENU
MAIN
iPod CTRL
3 Select 'System Setup' from the HOME MENU.
4 Select 'Input Setup' from the System Setup menu.
4.SystemSetup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit
5 Select the input function that you want to set up.
The default names correspond with the names next to the
terminals on the rear panel (such as DVD or VIDEO1)
which, in turn, correspond with the names on the remote
control.
6 Select the input(s) to which you've connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD input function's
Digital In setting from COAX-1 (default) to the optical
input you've connected it to. The numbering (OPT-1 to 4)
corresponds with the numbers beside the inputs on the
back of the receiver.
MUTE
• If your component is connected via a component
VIDEO
PARAMETER
TOOLS
video cable to an input terminal other than the
T.EDIT
GUIDE
default, you must tell the receiver which input
PRESET
terminal your component is connected to, or else you
RETURN RETURN
may see the S-Video or composite video signals
instead of the component video signals.
CH LEVEL
7 When you're finished, proceed to the settings for
other inputs.
PQLS MEMORY
There are three optional settings in addition to the
CH
assignment of the input jacks:
RECEIVER RECEIVER
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
ZONE 3
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT or the
front panel INPUT SELECTOR dial. (DVD and other
inputs can be still be selected directly with the input
function buttons.)
4b.Input Setup
A/V RECEIVER
Input : DVD
Input Name : Rename
Input Skip : OFF
Digital In : COAX-1
HDMI Input : - - -
Component In : Comp-1
12V Trigger1 : OFF
12V Trigger2 : OFF
Return Exit
1
Finish