Using The High Pass Filter; Adjusting Source Levels; Compensating For Equalizer Curves (Eq-Ex); Setting Up The Dvd Player - Pioneer AVIC-N3 Operation Manual

Using the high pass filter

When you do not want low sounds from the sub-
woofer output frequency range to play from the
front or rear speakers, turn the HPF (high pass
filter) on. Only frequencies higher than those in
the selected range are output from the front or
rear speakers.
1
Touch "HPF" in the AUDIO menu.
2
Touch "ON" to turn high pass filter on.
To turn high pass filter off, touch "OFF".
3
Touch  or  to select cut-off frequency.
Each time you touch  or  selects cut-off fre-
quencies in the following order:
50 — 80 — 125 (Hz)
When PREOUT (the subwoofer controller
setting in INITIAL menu) is SUB W, the
HPF function is effective for front speakers
only.

Adjusting source levels

SLA (source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between
sources.
• Settings are based on the FM tuner volume
level, which remains unchanged.
1
Compare the FM tuner volume level with
the level of the source you wish to adjust.
2
Touch "SLA" in the AUDIO menu.
3
Touch "+" or "–" to adjust the source vol-
ume.
+4 to –4 is displayed as the source volume is
increased or decreased.
Sources are set to same source level adjust-
ment volume automatically.
• CD and MP3
• DVD (built-in DVD drive) and S-DVD
(optional DVD player)
• EXT-1and EXT-2
• AUX and AV
• XM and SIRIUS
110
Compensating for equalizer
curves (EQ-EX)
The EQ-EX function smoothes the effects of each
equalizer curve. Furthermore, you can adjust
bass and treble for each source when CUSTOM
curve is selected.
1
Touch "EQ-EX" in the AUDIO menu.
Touching "EQ-EX" switches between "ON" and
"OFF".

Setting Up the DVD Player

To set up the DVD of an optional DVD player,
please refer to the "Owner's Manual" for that
DVD player.

DVD setup adjustments

(1)
You can use this menu to change audio, subtitle,
parental lock and other DVD settings.
(1) DVD setup menu display
Shows the DVD setup menu names.
1
Touch  and touch the screen to display
touch keys.
2
Touch ➞ to display "SETUP".
Touch ➞ until "SETUP" appear in the screen.
SETUP will be displayed instead of MENU.
3
Touch "SETUP" when the disc is
stopped.
The DVD setup menu is displayed.
4
Touch the desired function.

Setting the language

You can set a desired subtitle, audio and menu
language. If the selected language is recorded on
the DVD, subtitles, audio, menu are displayed in
that language.