Panasonic Toughbook CF-C1ADAAZ6M Reference Manual page 70

Quick Boot Manager
Setting item
Change other Windows settings
1
Launch Quick Boot Manager.
2
Click the mode you want to configure.
3
Read the content of the screen carefully, and add check marks for necessary items.
Follow the on-screen instructions.
If a password is set in the Setup Utility, a password entry screen may appear. If this occurs, enter a supervisor
password or user password, and click [OK].
If you deleted restore points, the confirmation message for optimizing the disk appears. Click [Yes]. Wait a
moment until disk optimization completes.
Boot Training
Boot Training is a Windows function that reduces the startup time of Windows. Quick Boot Manager uses this function to
reduce the startup time of Windows.
Setting procedure
Boot Training may take approximately 40 minutes.
1
Connect the AC adaptor.
2
Launch Quick Boot Manager.
3
Click [Boot training].
4
Configure [When to run Boot Training] and [Next action after Boot Training], and click
[OK].
Follow the on-screen instructions.
Allows you to reduce the Windows startup time by changing the following
settings.
Move the Windows system to physical memory as much as possible.
Bypass the logo display at Windows startup.
<Only for models with Flash Memory Drive>
Do not wait for desktop preparations to complete during logon.
Check files to be used at hibernation during logon.
Optimize reading from disk at startup.
Description
70