[Text Stamp] - Panasonic Lumix DMC-FX48 Operating Instructions Manual

∫ Delete the title
[SINGLE] setting
1
4
In step , delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [‚].
3
Press [MENU/SET] to close the menu.
[MULTI] setting
1
4
In step , delete all the texts, select [EXIT], and press [MENU/SET].
2
Press [MENU/SET] to close the menu.
Note
•
Text can be scrolled if all of the registered text does not fit on the screen.
•
The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene mode or
[LOCATION] in travel date can also be registered by using the operation in steps
following.
•
The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and
[TITLE EDIT] cannot be registered at the same time.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO" bundled software on the
CD-ROM (supplied).
•
You can set up to 50 pictures at one time with [MULTI].
•
You cannot use title edit for the following pictures.
– Motion pictures
–
Protected pictures
–
Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P20)
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then press
[MENU/SET] to set.
•
['] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
•
The setting is canceled when [DISPLAY]
is pressed again.

[TEXT STAMP]

[SINGLE]
Press 2/1 to
select the picture.
Advanced (Playback)
4
and
] will be
[MULTI]
Press 3/4/2/1 to
select the pictures.
VQT1X57
87