Motion Picture Mode - Panasonic Lumix DMC-FX48 Operating Instructions Manual

n
[REC] mode:
Advanced (Recording pictures)

Motion Picture Mode

Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [n].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
• The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
•
When the subject is focused, the focus indication
lights.
•
The focus and zoom are fixed to the setting when
recording starts (the first frame).
•
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
•
If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
•
When you set the picture quality to [
card with "10MB/s" or greater displayed on the package.
Press [MENU/SET].
Press 3/4 to select [REC QUALITY] and then press
1.
Changing the settings for the picture quality
], [
A
] or [ ], we recommend using a high-speed
Advanced (Recording pictures)
B
C
VQT1X57
59