Panasonic Lumix DMC-FX48 Operating Instructions Manual page 26

Preparation
[VERSION DISP.]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC
coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult your nearest Service Center.
For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
~ [LANGUAGE]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[DEMO MODE]
DEMO
•
In Playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.
•
Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.].
Press [MENU/SET] to close [AUTO DEMO].
•
[JITTER, SUBJ. MOVE DEMO.] is an approximation.
•
[AUTO DEMO] has no TV output capability even when it is in playback mode.
26
VQT1X57
It is possible to check which version of
firmware is on the camera.
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]
¢
[ITALIANO] /[繁體中文 ]
¢ Not displayed on DMC-FX48P
The camera automatically detects jitter and the movement of the
subject and displays these on the indicator. ([JITTER, SUBJ.
MOVE DEMO.])
The camera's features are displayed as slide shows. ([AUTO
DEMO])
[JITTER, SUBJ. MOVE DEMO.]
A Jitter detection demonstration
B Movement detection demonstration
[AUTO DEMO]:
[OFF]
[ON]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
¢ ¢
/[FRANÇAIS] /[ESPAÑOL]/
¢ ¢
/[¢]
A
B