2.
Insert a new battery (CR2025) into the
battery holder.
Make sure that the plus (+) side of the
battery is facing upwards (so you can
see it).
Connecting a Projector
Make sure that the YP-100 and the projector are both turned off before connecting them.
YP-100
RGB OUT
LINE OUT
terminal
terminal
Audio cable (commercially available)
RGB cable (commercially available or bundled with the projector)
The audio part of a movie file stored on a USB memory devices connected to the YP-100
is output from the YP-100's LINE OUT terminal. There is no need to connect the YP-100's
LINE OUT terminal to external equipment if you do not want to output recorded audio.
If the projector you are using does not have a LINE IN terminal, you can connect the
YP-100's LINE OUT terminal to a speaker with built-in amplifier.
3.
Slide the battery holder back into the
remote controller.
To RGB IN
terminal
E-13
Getting Ready
Projector
To LINE IN
terminal