Table of Contents
Advertisement
Getting Ready
Preparing the Remote Controller
The remote control unit comes loaded with a test battery. Before using it for the first time,
remove the battery insulation sheet from the back of the remote controller.
To avoid running down the battery, store the remote control unit so its buttons are not
pressed inadvertently.
Replacing the Remote Controller Battery
The battery (CR2025) that comes pre-installed in the remote controller is for test purposes.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
Caution
TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Misuse of a battery can cause it to leak and stain of the area around it, or
to explode, creating the risk of fire and personal injury. Make sure that you
always observe the following precautions.
Caution
1.
Turn over the remote controller. Insert your thumbnail into slot
and press to the right as you pull the battery holder out of the remote controller by
2
pulling on slot
1
Getting Ready
Take care that battery is positioned correctly when you load it.
Use only the type of battery that is specified for use with the remote
controller.
with your index finger nail.
2
E-12
1
on the battery holder
Battery holder
Advertisement
Table of Contents
